Load data for .30 PICRA + .308 | 180gr | Speer Spitzer Soft Point

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 180gr \| Speer Spitzer Soft Point
Manufacturer SKU:	2053
Bullet Weight:	180gr \| 11.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.167" \| 29.6mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.286" \| 7.3mm
Shank Seated Depth:	0.286" \| 7.3mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B6170_C311
Last updated:	2025-01-01

Load data for 38 loads in caliber .30 PICRA with .308 | 180gr | Speer Spitzer Soft Point bullet and 19 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	35708	88%	**29	100%
Accurate 4100	<<locked>>	71%	36100	89%	**30	94%
[Accurate No. 11 FS]*	<<locked>>	80%	35897	88%	**34	87%
Alliant 2400	<<locked>>	68%	36419	90%	**34	96%
Alliant BLUE DOT	<<locked>>	70%	35114	86%	**81	99%
Hodgdon H110	<<locked>>	76%	36521	90%	**63	91%
Hodgdon LilGun	<<locked>>	76%	35621	88%	**76	97%
Hodgdon TrailBoss	<<locked>>	92%	24613	61%	**7	100%
Ramshot Enforcer	<<locked>>	68%	35520	87%	**24	97%
ReloadSwiss RS 14	<<locked>>	93%	24178	60%	**7	100%
ReloadSwiss RS 30	<<locked>>	91%	34592	85%	**63	93%
SNPE Vectan BA6 1/2	<<locked>>	93%	35839	88%	**20	98%
SNPE Vectan BA7 1/2	<<locked>>	65%	35926	88%	**89	100%
[Somchem S265]*	<<locked>>	82%	34882	86%	**94	89%
Vihtavuori 3N38	<<locked>>	68%	36318	89%	**71	100%
Vihtavuori N105	<<locked>>	70%	36347	89%	**84	100%
Vihtavuori N110	<<locked>>	84%	34795	86%	**34	96%
Vihtavuori N32C Tin Star	<<locked>>	78%	36303	89%	**8	100%
[Winchester 296]*	<<locked>>	74%	35143	87%	**60	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	26977	66%	**20	100%
[Accurate 4100]*	<<locked>>	61%	25657	63%	**70	88%
[Accurate No. 11 FS]*	<<locked>>	70%	25556	63%	**79	80%
Alliant 2400	<<locked>>	61%	28543	70%	**12	93%
Alliant BLUE DOT	<<locked>>	61%	27180	67%	**73	98%
[Hodgdon H110]*	<<locked>>	61%	22336	55%	**33	82%
[Hodgdon LilGun]*	<<locked>>	61%	20610	51%	**24	87%
Hodgdon TrailBoss	<<locked>>	66%	15505	38%	**9	100%
Ramshot Enforcer	<<locked>>	61%	28108	69%	**19	94%
ReloadSwiss RS 14	<<locked>>	62%	14025	35%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	71%	19725	49%	**8	81%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14591	36%	**3	84%
SNPE Vectan BA7 1/2	<<locked>>	61%	31198	77%	**37	100%
[Somchem S265]*	<<locked>>	67%	22582	56%	**4	81%
Vihtavuori 3N38	<<locked>>	61%	29994	74%	**89	100%
Vihtavuori N105	<<locked>>	61%	27224	67%	**73	100%
[Vihtavuori N110]*	<<locked>>	61%	17521	43%	**8	84%
Vihtavuori N32C Tin Star	<<locked>>	61%	25092	62%	**7	100%
[Winchester 296]*	<<locked>>	64%	25019	62%	**96	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data